How to Modify a Job Site Address

How to Modify a Job Site Address

If a job site was set up with the wrong address, or the job moves, you can correct its address in the Overview portal. Overview updates the job site's map position for you, so equipment is placed at the right location.

1

Find

Find > Job Sites

2

Edit

Select the job, click the pencil.

3

Update

Type the new address.

4

Save

Check the position, click Save.

Before You Begin

What You'll Need

  • An Overview portal login
  • The job site name and the correct street address

Update the Address

1Open Find and choose Job Sites

From the left-hand menu, select Find, then click Job Sites.

Looking for a job that has been closed? Check Include Closed above the list.

2Select the job site

Click the job site in the list. Its address and opened date show below the list, and it's highlighted on the map.

3Click Edit

Click the pencil (Edit) button above the list. The Edit Job Site window opens.

You can also click the pencil in the job site's pop-up on the map.

Figure 1: Find > Job Sites with a job selected and the pencil button highlighted

4Enter the new address

Click in the Address box, delete the old address and type the new one. Include the street, city, state and ZIP code.

5Click outside the Address box

Click anywhere outside the Address box. Overview looks up the address and fills in the Position (latitude and longitude) automatically.

TIP

Check that the Position numbers changed. If they didn't, the address may not have been recognized. Check the spelling and ZIP code, then click outside the box again.

Figure 2: Edit Job Site window with the new Address and updated Position

6Save

Click Save. The job site moves to the new address on the map. Click Cancel instead to close without making any changes.

Check Your Change

  • The address under the job site list shows the new address.
  • On the map, the job site icon sits at the new location.
  • If the job site's area (radius) needs adjusting for the new property, see Background Sweep for Job Site History Report, Change a Job Site's Radius.

IMPORTANT

Change only the Address. Leave Job Site Tracker and GPS Active alone unless Customer Support asks you to change them.

NOTE

Moving a job site can change which equipment falls inside its area. Equipment already sitting at the new location may be added to the job and show as Background Sweep in the Job Site History report.

Troubleshooting

IssueWhat to Try
I can't find the job siteCheck Include Closed, or type part of its name in the search box above the list.
The Position didn't changeThe address wasn't recognized. Check the spelling, city and ZIP code, then click outside the Address box again.
The pin is on the wrong spot of a large propertyMake sure the address is the main street address for the property. If not, you can edit the job site address or type in the lat long for more precise location.
I don't see the pencilYour login may not be allowed to edit job sites. Ask your company's Overview administrator.

Quick Reference

DoRemember
Find > Job Sites, select the jobPosition updates automatically
Click the pencilClick outside the Address box to update it
Type the new Address, click SaveChange only the Address field

Related articles: Job Site History Report · Background Sweep for Job Site History Report · Editing an Asset

NEED HELP?

Overview Customer Support

Email: overviewcustomerservice@logikos.com

Please include the job site name and the correct address with any support request.